Need help: How to mass-delete "Missing Texture" blocks (blue squares with question marks)?

[noname835]

Hi everyone,

I’m looking for a fast and efficient way to remove all the transparent blue blocks with a blue question mark inside. I'm aware these are obsolete or missing blocks from a previous version/mod, but I can't seem to get rid of them.

I’ve spent hours trying to use the "Find and Replace" menu. Whether I try a single selection or a mass selection, I can't find the correct ID to target them, nor a way to replace them with air or another block.

Does anyone know a specific command, tool, or workaround to identify these "placeholder" blocks and delete them all at once?

Thanks in advance for your help!

 

[zztong]

I suspect the "prefabupdater" is what you're after. I once wrote up some notes about using it for KatsPurr, which you can read here:

Console Commands

Block Conversion Backup your POIs before you do this. At Main Menu, F1: prefabupdater loadtable prefabupdater updateblocks This usually gets a large percentage of the missing blocks. You'll still have some issues: Some blocks may have changed their rotation and the conversion cannot fix that...

docs.google.com

 

[Blue mame]

Replace missingBlock with air, save, and then reload POI.

 

[Riamus]

Yeah, do the update commands that ZZTong mentioned. It'll fix the majority of blocks (perhaps all). Anything remaining can just be replaced. If you can't use the find/replace, you can manually remove them by clicking on them and deleting the block like you would with any blocks you want to change in the POI Editor.

 

[noname835]

Thanks for your replies!

First, to answer Blue Mame: I have of course tried that, but unfortunately, nothing is working.

Regarding zztong's suggestion: I entered the three commands. I could see in the console that all my POIs were being processed. The last command did take quite a while, I saw all the POIs being scanned, and some of my personal POIs were modified.

And to answer Riamus: Yes, usually I do it that way, block by block, and it works perfectly. However, in this case, there are hundreds of them, which is why I reached out to you to find a more efficient solution.

Thanks again for your help!


Quick update:I tried Blue Mame's trick again, even though I had already tried it several times before. In my previous attempts, I didn't save because the blue transparent squares with the question marks were still showing on the screen.

This time, I went ahead, saved, and reloaded the POI, and I can confirm that it works! A huge thank you to Blue Mame and everyone else for your help.

 

[Blue mame]

Thanks for your replies!

First, to answer Blue Mame: I have of course tried that, but unfortunately, nothing is working.

Regarding zztong's suggestion: I entered the three commands. I could see in the console that all my POIs were being processed. The last command did take quite a while, I saw all the POIs being scanned, and some of my personal POIs were modified.

And to answer Riamus: Yes, usually I do it that way, block by block, and it works perfectly. However, in this case, there are hundreds of them, which is why I reached out to you to find a more efficient solution.

Thanks again for your help!


Quick update:I tried Blue Mame's trick again, even though I had already tried it several times before. In my previous attempts, I didn't save because the blue transparent squares with the question marks were still showing on the screen.

This time, I went ahead, saved, and reloaded the POI, and I can confirm that it works! A huge thank you to Blue Mame and everyone else for your help.

If you follow my steps, it will work normally, because that's how I handled it. You missed a save and reload step. You'll understand later. It's possible that my expression was flawed, as it seemed contradictory. Firstly, my English isn't great, and secondly, the whole operation seemed contradictory. However, you need this seemingly contradictory approach for it to work.lol