• If you have a mod, tool or prefab, please use the Resources section. Click Mods at the top of the forums.

A19e Nitrogen - UNSTABLE

Status
Not open for further replies.
I tried that… this one I think it was after a blur.https://cdn.discordapp.com/attachmen...64/unknown.png
Click to expand...
I show you how tweak bright level & curve

First one this map too white cause too high & spikes mountain & too black cause too deep

vSkplRp.png


I was tweak bright & contrast make less white

Vl7Gypo.png


Then final tweak curves bit light up make normal hills & mountain no more spikes, if too low land cause flooded water try tweak bit light up grey, just trial & error.

YNer5yR.png


 
I did try the brightness and curves, with better but still not satisfying results… I'm gonna give it a second shot tho.. We have to stay home anyways x)

 
I did try the brightness and curves, with better but still not satisfying results… I'm gonna give it a second shot tho.. We have to stay home anyways x)
Click to expand...
After tweak heightmap & re-generate will update map hope get better lower mountain.

 
After tweak heightmap & re-generate will update map hope get better lower mountain.
Click to expand...
I spent a large part of the morning playing with it, but still can't manage to get something as good as you posted… not even close… btw. how did you manage to have the water almost at the same Level of the main land? I Always end up with the continent ending in a cliff. no natural shores. I increased the spawn water number in the config file, but I guess I was doing somethjing else wrong, because that didn't help

 
Is this possible?I like mountain forest maps,can TER_BASE_HIGHT = 35 be lowered i like more defined mountains so can this be done TER_BASE_HIGHT = 14 TER_WATER_SPAWN_AT = 12 what will prefabs do is their height in the prefab config or will prefabs be at TER_BASE_HIGHT that i put in

 
Can anyone explain to me why every map I generate the water table is so low? Even the oceans are only about 5 blocks high. It is quite annoying. I don't see any setting that even changes that? So if anyone could put some insight into what I'm doing wrong that would be amazing.

 
Can anyone explain to me why every map I generate the water table is so low? Even the oceans are only about 5 blocks high. It is quite annoying. I don't see any setting that even changes that? So if anyone could put some insight into what I'm doing wrong that would be amazing.
Click to expand...
have you edited the config? default is TER_BASE_HIGHT = 35 TER_WATER_SPAWN_AT = 33 are you using random gen or terrain-party..real world height maps usually make the water to high ..i take the water down to 21 on average..you maps base terrain is maybe to high so that even low areas are to high for the water,go in to config and increase the water spawn number .in small increments then redo world generation..I still cant generate biomes for real world height maps only snow gets drawn on to biomes.png and thats from the bright areas on the import_HM

 
I have prepared height map and biomes.png - but Nitrogen generate own biomes.png always - how to force Nitrogen to use my biomes.png togeder with heightmap and mask to generate the map file?

Or is the biomes.png used by 7dtd straight away to generate biomes?

 
Last edited by a moderator:
I can add more variety in the future. The landscape dropdown has a variety of predefined mixes, that turn on an off more or less of the features.I can make that ratio more specific on future versions.

Whole new landscape types would have to be made too, but that takes a bit more effort.

Things like swamps, high green mountains, very deep canyons on a high desert plateau.

I have not finished implementing big lakes (7DtD is quite picky about water flooding the level if not placed correctly, so that has to be done carefully).

There are lots of smaller lakes - at different elevations - dotting the landscape, to have a source of water available in all areas.
Click to expand...

your work is excellent, I love it. One of your 16k cards is running on my server

 
Damocles, thanks for this tool. i have generated a few maps now and they are damn good. This last map i made has large areas of flat dirt without grass. Mostly appears to be around the water table level. Just wondering if i have a setting wrong? not really changed too much from default settings.

 
HEY guys HELP!

I have prepared height map and biomes.png - but Nitrogen generate own biomes.png always - how to force Nitrogen to use my biomes.png togeder with heightmap and mask to generate the map file?

Can anyone help me?

 
Can anyone tell me how to get the POI's from War of the Walkers into NitroGen? If you can, then, as General Sarris said in Galaxy Quest "Explain as you would, a child".

 
HEY guys HELP!I have prepared height map and biomes.png - but Nitrogen generate own biomes.png always - how to force Nitrogen to use my biomes.png togeder with heightmap and mask to generate the map file?

Can anyone help me?
Click to expand...
you can just replace the Biomes file for your own and then when loading the world it will use your Biomes.

 
@Jeraal It is a very time consuming project but not too difficult. First you have to use Pille Prefab editor here https://forums.7daystodie.com/forum/...b-editor-alpha to convert the A17 WOTW blocks to A18. There are instructions on how to do that in his thread on page 75, 76, or 77 don't remember exactly which. Then you have to add them all to the prefab list you use to build your worlds. I can explain that better once you get the first part done.

 
Last edited by a moderator:
@Jeraal It is a very time consuming project but not too difficult. First you have to use Pille Prefab editor here https://forums.7daystodie.com/forum/...b-editor-alpha to convert the A17 WOTW blocks to A18. There are instructions on how to do that in his thread on page 75, 76, or 77 don't remember exactly which. Then you have to add them all to the prefab list you use to build your worlds. I can explain that better once you get the first part done.
Click to expand...
WotW is in beta for A18 now. Still has plenty of bugs, but when it's ready I definitely want to use NitroGen.

 
Hello!

Just started using Nitrogen (and Prefab 43) yesterday, and am really enjoying it!

I do have one questions, though: The Store Shelves container is used pretty extensively in the new prefabs, but is always empty. Is that intended?

Thanks!

 
Status
Not open for further replies.
Back
Top