Feycat
Refugee
Here's the one we've got that has held up relatively well to a couple horde nights now:
https://steamcommunity.com/sharedfiles/filedetails/?id=1572681989
Each of the solid crosses has a 4-high pillar in the middle. The small blocks are 2 of the quarter blocks stuck together. You CAN fall through, but as long as you don't stop between them and aim for them as you walk, you're ok. I would like to replace them with iron bars when we have enough iron for that, but right now these work to shoot and see through.
It is full of wood spikes underneath. There are 2 rows of barbed wire and 1 row of spikes around the perimeter. As long as we keep moving, they will not smash any one location too badly. And if one column falls, it generally doesn't take the others with it, so we've been able to keep most of the table intact through both nights.
The disadvantages are
1. no vulture protection. This has been a real problem for me
2. no arrow retrieval, we go up there with a couple stacks each
3. no way to repair the columns mid-fight because you can't reach them.
So far we haven't had trouble with the new upside-down spiders because they've been going under the table itself to climb up, and they can't reach us through the quarter blocks.
This is obviously ONLY a fight cage for horde night, NOT a base. You can actually see the POI we've fortified (the bottom floor/porch is solid brick cobblestone except for a 1x1 tunnel that leads to our emergency escape tunnel) on the left.
Any thoughts on how to improve this besides just upgrading the material? What else have people figured out besides just riding it out on a POI?
https://steamcommunity.com/sharedfiles/filedetails/?id=1572681989
Each of the solid crosses has a 4-high pillar in the middle. The small blocks are 2 of the quarter blocks stuck together. You CAN fall through, but as long as you don't stop between them and aim for them as you walk, you're ok. I would like to replace them with iron bars when we have enough iron for that, but right now these work to shoot and see through.
It is full of wood spikes underneath. There are 2 rows of barbed wire and 1 row of spikes around the perimeter. As long as we keep moving, they will not smash any one location too badly. And if one column falls, it generally doesn't take the others with it, so we've been able to keep most of the table intact through both nights.
The disadvantages are
1. no vulture protection. This has been a real problem for me

2. no arrow retrieval, we go up there with a couple stacks each
3. no way to repair the columns mid-fight because you can't reach them.
So far we haven't had trouble with the new upside-down spiders because they've been going under the table itself to climb up, and they can't reach us through the quarter blocks.
This is obviously ONLY a fight cage for horde night, NOT a base. You can actually see the POI we've fortified (the bottom floor/porch is solid brick cobblestone except for a 1x1 tunnel that leads to our emergency escape tunnel) on the left.
Any thoughts on how to improve this besides just upgrading the material? What else have people figured out besides just riding it out on a POI?