-
If you have a mod, tool or prefab, please use the Resources section. Click Mods at the top of the forums.
[Prefabs] ZZTong's Custom POIs
- Thread starter zztong
- Start date
Riamus
Well-known member
Thanks, I'm checking for advice there.
While waiting to figure out Teragon, I tried creating a map with the game's RWG with your modlet, but none of the prefabs appeared in the game. Do you have any suggestions? In my %appdata%\7DaysToDie\Mods\ folder, I have 3 folders - yours, Deverezieaux's and the one Teragon generates. I think that's all that is necessary to make use of the prefabs, but it doesn't seem to have added prefabs from these folders. I verified by checking the prefabs.xml file for the world that was generated and, since yours are easy to identify as they start with zztong, I started by searching those as the only thing I saw that looked like something I hadn't seen was a deep, narrow waterway that was built around a corner with stairs leading down on both legs and a building at the corner. I'm guessing I just never noticed it before as the prefabs aren't listed in the file. The prefab I made that I placed in LocalPrefabs was added by RWG, but from the ones I've checked from the modlets, none are there.
One possible thing is that I have the Saves and Generated Worlds stored on a different drive (i.e. not in %appdata%). Would that require the Mods folder to be placed there instead of %appdata% maybe? Thanks. I appreciate the help.
Last edited by a moderator:
zztong
Well-known member
That's the right approach and should do it. I want to double-check a couple of things.
You list this path:
%appdata%\7DaysToDie\Mods\
But it would normally be:
%appdata%\Roaming\7DaysToDie\Mods
Resulting in:
%appdata%\Roaming\7DaysToDie\Mods\ZZTong-Prefabs
And in that folder at that level you should find a ModInfo.xml file and subdirectories.
Sometimes folks grab a folder out of a ZIP files and later discover there were two layers of ZZTong-Prefabs folders. It depends on how the ZIP gets unpacked as to if that happens.
Yes, perhaps.
One way to tell if the game is seeing your Mods is if you hit F1 while the game is loading. There's a few lines near the top of the log that show the names of the modlets that the game discovered.
It doesn't actually try to interpret/use the modlets until you start a new game, continue a game, or use some of the tools. But at launch as it is getting ready to show you game menus it is discovering things like modlets.
Here's an excerpt from one of my log files. Make note of that first line. You should be able to find similar in your log files. Search on "[MODS]" and it should be near the start of the log file.
My log files are found here:
C:\Users\zzton\AppData\Roaming\7DaysToDie\logs
Code:
2023-01-15T15:25:13 8.852 INF [MODS] Start loading from: 'C:\Users\zzton\AppData\Roaming/7DaysToDie/Mods'
2023-01-15T15:25:13 8.855 INF [MODS] Trying to load from folder: 'Loading-Screen-Jokes'
2023-01-15T15:25:13 8.873 INF [MODS] Loaded Mod: Loading-Screen-Jokes (20.6)
2023-01-15T15:25:13 8.873 INF [MODS] Trying to load from folder: 'Pilles-Super-Brush'
2023-01-15T15:25:13 8.874 INF [MODS] Loaded Mod: Pilles Super Brush (StableA17)
2023-01-15T15:25:13 8.874 INF [MODS] Trying to load from folder: 'RELXIX_UIMENU_MoreRWGSizeOptions'
2023-01-15T15:25:13 8.875 INF [MODS] Loaded Mod: RELXIX_UIMENU_MoreRWGSizeOptions (1.1.1)
2023-01-15T15:25:13 8.875 INF [MODS] Trying to load from folder: 'Teragon POIs'
2023-01-15T15:25:13 8.876 INF [MODS] Loaded Mod: Teragon POIs (A20.6)
2023-01-15T15:25:13 8.876 INF [MODS] Trying to load from folder: 'ZZTong-7D2D-Solo-Game'
2023-01-15T15:25:13 8.876 INF [MODS] Loaded Mod: ZZTong-7D2D-Solo-Game (20.6)
2023-01-15T15:25:13 8.876 INF [MODS] Trying to load from folder: 'ZZTong-Prefabs'
2023-01-15T15:25:13 8.877 INF [MODS] Loaded Mod: ZZTong-Prefabs (20.6.013)
2023-01-15T15:25:13 8.877 INF [MODS] Initializing mod code
Last edited by a moderator:
Riamus
Well-known member
Hmm. I checked my log and it states no mod folder found. %appdata% (at least in Windows 10) takes you to ..\AppData\Roaming\ already, so %appdata%\7DaysToDie\ is ..\AppData\Roaming\7DaysToDie\ . That folder has one file (launchersettings.json) and the subfolders (LocalPrefabs, logs, Mods, Screenshots, titlestorage). Within Mods\ZZTong-Prefabs\, there is the ModInfo.xml file and the same for Deverezieaux's and Teragon's folders.
I'll trying moving the mods folder to the save drive and see if it is recognized and will let you know.
EDIT: Ok, so moving the folder resulted in it being found on load. I assume it will now work with RWG and probably Teragon as well. So if anyone has this question in the future, if they set their save location to another place, this also affects the Mods folder and not just the Saves and Generated Worlds folders (logs are still in %appdata%).
Last edited by a moderator:
zztong
Well-known member
Riamus
Well-known member
Got this working with Teragon now as well. I noticed that you might want to update the thumbnail of your solar_farm_01 as it shows the editing selection lines. And, I am really liking your POI in the game. They play well so far, though I just started and have only gone into some of the tier 1s so far.
zztong
Well-known member
Oh, good point. It didn't use to matter as the thumbnail would only show in the Prefab Editor. Now there are modlets showing the picture, so I probably have many of those thumbnails that need an update.
Astralweaver
Member
Thank you for your using Teragon help text file you put in your prefabs I used it to get compopack to work. I have a pretty simple question though. Should all the prefabs be put on one property list or can you import multiple property lists using the method in your Using Teragon help text? I have a bunch of prefabs from A19 I want to bring over to A20 and was wondering if I should make a copy of compopack list and ad add them in or make my own list and just load it up a second time the way your help file described. I haven't played 7D2D ever since wilderness bug and the in game generator kept making errors when I would try to make a map. Thanks to Teragon I can play again!
zztong
Well-known member
I think multiple lists would work. That's how I'd do it, but I have not tried it beyond using a vanilla list and my list together.
If they are A19 files then you'll have to convert them and probably resize them. That can be a lot of work. Are they unique to you? Otherwise, you might find they are part of the CompoPack and somebody has already done all the work. If they're unique to you, and you convert them, then my approach would be to make a modlet for them and make your own list. Or, dump them in your LocalPrefabs and make your own list.
I have no idea what bug that might be. RWG has been solid for me all through A20. Folks are getting Teragon to turn out some really nice terrain, but they're also having trouble with Wilderness POIs. The future of Teragon looks bright, but right now you've got your work cut out for you. I've gotten Wilderness POIs to appear in numbers, but they like to cluster in open spots, kind of making a disorganized city. There are a number of other folks who are doing much more with it than I've had time.
Astralweaver
Member
They are unique to me there was a ton of buildings I liked in WOTW and RH that I pulled out and put in a poi folder I even pulled the blocks out needed for the pois it took awhile. There are also many dled from several different locations that I have to verify that are not in compopack before I move them over. I know it is going to be a big task and will take awhile, but now that I can play I want all the stuff I had before it was all set up nice and perfect than A20 stirred the pot and made a mess
zztong
Well-known member
A20 stirred the pot and made a mess
It certainly stirred the pot. It was a lot of work converting POIs, but the Tiles and Parts features are worth it. Best of luck with your conversion.
Is the wilderness bug related to size? I know @stallionsden has had issues with very large POIs in the wilderness.
Last edited by a moderator:
stallionsden
Tester
Riamus
Well-known member
Yes, multiple lists work. I made one for Deverezieaux's modlet and use yours, zztong, and stuff from both appear. It is a good way to keep everything separate. Use multiple import POI property list commands with each file added, then you have the option of using a single add source path command for the root of your mods folder if subdirectories is selected, or you can set up multiple add source paths (one for each mod) if you want an easy way to disable and enable specific mods.
Last edited by a moderator:
zztong
Well-known member
I... don't know. Which POI? What's a White River Supply Crate?
I'm on Discord. I can see the Rebirth channels. If you're around, just use the @ feature to summon me to whichever channel you think best and we can chat real-time if you like. Or I can... I guess #general-chat on Rebirth's boards.
Last edited by a moderator:
zztong
Well-known member
I'm unaware of a problem with my Wilderness POIs. Are you talking about generating maps using Teragon? I'm aware there's a lot of discussion about Teragon issues on the Teragon Discord and in the Tool part of these boards.
zztong
Well-known member
No worries. I don't have any first-hand experience with trying to convince Teragon to place more Wilderness POIs, but others have. IIRC, I think it depends on settings related to smoothness and perhaps some changes to the configuration file I provided to indicate other biomes, altitudes, or something. My strategy with Teragon has been to provide basic support for the moment and look for it to evolve a little.
Thanks for the info. I tried using your ZZTong-Prefabs using KingGen and none of them are showing up on maps I make. Just letting you know. Not sure what I'm doing wrong. I been adding prefabs to the prefab folder and those work. Just can't get yours to show up on the maps I create.