PC Never managed to align them what i m doing wrong?

the hatch/ladder with the tunnel. if i close the hatch the tunnel is visible. if i add dirt it will be uglier.

it is possible that the door to fit in the tunnel and not rotated 45° ?

 
You do need one more ladder in shaft though before adding you hatch so it is on top of hole.

There will be those little opening on sides of hatch. That is because of the way the blocks work I guess. I usually just make a 3x3 block of wood frames with the hatch in center (no frame in center of course). That makes it look neater

 
Last edited by a moderator:
Not that much digging. You only need to dig out the 8 blocks around your shaft. Then add the ladder all way to top like in pic.

I always try to make sure my hatch opens away from my ladder. That is just my personal preference though.

z6Rq8tj.png


 
Last edited by a moderator:
Yeah, the ground blocks are shaped differently. You'll need to surround it with regular blocks to get it square. That's only 4 more holes. :)

Edit: Ninjaed by Gamida with a picture. Although I don't dig the corners, and will just put a wood fence down on top of them.

 
Yeah, the ground blocks are shaped differently. You'll need to surround it with regular blocks to get it square. That's only 4 more holes. :)
Well I use 8 to make it "prettier" lol

 
yeah but if i can have one square aligned with ground blocks, i can plant something around it and will be hard to see.. :D

 
Back
Top