PC ———AIRPORT———

Putting it in the wasteland and have the rubble continue the runway after a certain point would make sense.

(sand dunes in the desert or snow drifts   also work.  Forest , naww.)

Or, just have a large lake (eg crater from big bomb)  where the runways would be.

:)

 
@saoron666 You want an airport? You got it! I've nearly finished adding an airport to a vanilla-generated 10K map.

Featuring

* Dozens of new prefabs including;

- Two types of crashed aircraft that can be found in the wilderness

- Runways and taxiways with appropriate markings

- Two Tier 1 POI aircraft

- Two Tier 2 POI aircraft

- One Tier 3 POI aircraft

- One Hangar POI, of which there are 3 placed instances on this map

- Remnant Hangar

- Remnant Aircraft

- Back-to-back connected Concourse-halves, each half being a Tier 4 POI in their own right

- A Giant Tier 5 Terminal POI that is about 50% bigger than Dishong Tower (Though Dishong Tower still holds the record for tallest POI)

There is a hitch; I've run into a game-breaking problem where the nearby trader stops giving quests. More details on that in this post.

I'm working on getting the issue sorted, though. In the meantime, enjoy these screenshots!

image.jpegimage.jpegimage.jpegimage.jpeg

 
Riamus said:
Randomly add in the snow, sand, or debris so it appears as if it is covering parts of the runway.  Slowly increase the amount of this as you get further until there is no asphalt left.  You can even add a few individual asphalt blocks as if it is showing through in a few places at the end.
Click to expand...


canadianbluebeer said:
Putting it in the wasteland and have the rubble continue the runway after a certain point would make sense.

(sand dunes in the desert or snow drifts   also work.  Forest , naww.)

Or, just have a large lake (eg crater from big bomb)  where the runways would be.

:)
Click to expand...


The game itself fixes the issue of a shoddy-looking runway. I used concrete terrain (not the concrete cube blocks) for the runway and low and behold, the game added debris relevant to the biome itself!

image.jpegimage.jpeg

Same with the taxiways, which I used asphalt; It treats it like roads, and places garbage (including dead cars) that you would find on any other road.

image.jpeg

That's not to say that other wilderness POIs couldn't be placed on runway RWG tiles, or that the runways themselves could also be cratered.

As far as long runways go, I placed this on a large, flat plot of empty desert, so nothing was really lost anyway. 

 
That airport looks great.  I might look into placing it on my own maps if you share it when you're done. 😀

 
AH64_Jimbo said:
@saoron666 You want an airport? You got it! I've nearly finished adding an airport to a vanilla-generated 10K map.

Featuring

* Dozens of new prefabs including;

- Two types of crashed aircraft that can be found in the wilderness

- Runways and taxiways with appropriate markings

- Two Tier 1 POI aircraft

- Two Tier 2 POI aircraft

- One Tier 3 POI aircraft

- One Hangar POI, of which there are 3 placed instances on this map

- Remnant Hangar

- Remnant Aircraft

- Back-to-back connected Concourse-halves, each half being a Tier 4 POI in their own right

- A Giant Tier 5 Terminal POI that is about 50% bigger than Dishong Tower (Though Dishong Tower still holds the record for tallest POI)

There is a hitch; I've run into a game-breaking problem where the nearby trader stops giving quests. More details on that in this post.

I'm working on getting the issue sorted, though. In the meantime, enjoy these screenshots!
Click to expand...
@AH64_Jimbo OMG bro!!!! thats insane! when is it available? so much details , never thought this can come true!!  , didnt make sense a city without an airport.. 

AH64_Jimbo said:
@Roland @saoron666 @Riamus @zztong @Tallman Brad @Naz @canadianbluebeer @Jason Tamosiunis @8_Hussars @Rotor @paulj_3 et all

It is done! I have solved the critical issues and have distributed the map with the airport named Navezgane Regional Airport

Download it, and try it for yourself! Remember that you'll have to unzip the files and place them in your 7 Days to Die user folder (Windows) typically found at

C:/Users/USERNAME/AppData/Roaming/7DaysToDie
Click to expand...
I was so excited that i didnt see this post saying it done! i will give it a try tonight for sure! XD cant wait to try it out.. wanna call in sick and leave work hahaha

 
Nice!  I checked this out briefly yesterday and it looks very cool.  I haven't played the game with it yet, doing quests, etc., but I am looking forward to trying that soon.  Thanks!  

 
Does that span more than 1 chunk? It looks huge and I wonder how that works when it crossed over into other load zones

 
warmer said:
Does that span more than 1 chunk? It looks huge and I wonder how that works when it crossed over into other load zones
Click to expand...
Normal settings will load more than one chunk at a time to avoid issues with a POI placed over the edge of a chunk.  I forget the exact number, but I've seen something like 3 or 4 in the logs.  But in this case, the airport is many different POI made into a single entity, so you won't have any more trouble with this than a town.

That being said, there are issues with very large POI that may relate to chunks.

 
Last edited by a moderator:
dbryson said:
Nice!  I checked this out briefly yesterday and it looks very cool.  I haven't played the game with it yet, doing quests, etc., but I am looking forward to trying that soon.  Thanks!  
Click to expand...
You are welcome. I'm glad that I could share it with the community. Please feel free to leave feedback; What do you like? What do you feel could use some improvement? Do you have any other questions or comments?

In the future I hope to expand by adding more and varied POIs and also try to integrate airports into Random World Generation (RWG).

 
Riamus said:
Normal settings will load more than one chunk at a time to avoid issues with a POI placed over the edge of a chunk.  I forget the exact number, but I've seen something like 3 or 4 in the logs.  But in this case, the airport is many different POI made into a single entity, so you won't have any more trouble with this than a town.
Click to expand...
@warmer Riamus is exactly right.

The airport spans many, many chunks. I can't remember how many chunks exactly, but I can tell you that the terminal and concourse itself sit on two 150 x 150 RWG tiles. That's 300 x 150 blocks (or meters). The terminal, concourse and gated aircraft are comprised of another 9 different, inter-connected POIs. That's not even counting the tarmac, hangars, taxiways and runways!

Fortunately, distant terrain and POIs are handled by "imposters" that show up from a distance until the POI loads up. Gives the illusion of one continuous, giant building from afar, and you can hardly tell any difference from inside the terminal and concourse.

 
Last edited by a moderator:
I found the airport, one hellacious long way from my start point.

Gonna do a run where the goal is to get to the airport, clear it out, and then amscray!  :D

It is huge!  (didn't go inside, that's gonna be the fun part)

 
AH64_Jimbo said:
This is exactly how I would design an airport; Make it a special type of settlement or town, which would have to be generated in a specific way. In fact, I have already been making a series of airport POI's. So far I have over a dozen POI's created including a terminal, two parts for a concourse, five airliners at gates, a vacant gate, two RWG tiles to put it together and more. Put together it looks something like this;

View attachment 26482

I'm hoping to continue on and create an entire airport over time. If you like what you see, check out some more of my Steam screenshots;

https://steamcommunity.com/profiles/76561197966986156/screenshots/
Click to expand...
I wonder if the FPs hire out POI creators, as this would be a cool ALL NEW POI to explore. I can not even imagine the amount of time that went into this. I have a very large base and its nothing compared to this.

Great creation!

 
bobrpggamer said:
I wonder if the FPs hire out POI creators, as this would be a cool ALL NEW POI to explore. I can not even imagine the amount of time that went into this. I have a very large base and its nothing compared to this.

Great creation!
Click to expand...
Thank you very much! I would very much like to see this airport or one like it in the base game of 7 Days To Die.

Admittedly I've worked on and off with this airport for over a year; Since shortly after Alpha 20 dropped. I wish to continue on and make more and varied POIs, maybe add another pre-gen map or two and ultimately get the airport to work with Random World Generation. That last bit has been a challenge, though, and I've been working with other creators here like Riamus and zztong to solve the RWG issue. Still, TFP developer support would make this easier.

Thanks again for checking out my airport, and if you know anyone that you think might enjoy this tell them that they can Download it and try it out for themselves. I'm always interested to hear feedback; What do you like the most about the airport? What do you feel could use some improvement? Any additional questions or comments? I'm always looking to refine my prefabs. Happy Hunting!

 
AH64_Jimbo said:
Thank you very much! I would very much like to see this airport or one like it in the base game of 7 Days To Die.

Admittedly I've worked on and off with this airport for over a year; Since shortly after Alpha 20 dropped. I wish to continue on and make more and varied POIs, maybe add another pre-gen map or two and ultimately get the airport to work with Random World Generation. That last bit has been a challenge, though, and I've been working with other creators here like Riamus and zztong to solve the RWG issue. Still, TFP developer support would make this easier.

Thanks again for checking out my airport, and if you know anyone that you think might enjoy this tell them that they can Download it and try it out for themselves. I'm always interested to hear feedback; What do you like the most about the airport? What do you feel could use some improvement? Any additional questions or comments? I'm always looking to refine my prefabs. Happy Hunting!
Click to expand...
Riamus know a lot about teragon (he's helped me with it). Could you add your airport in a random teragon map. I think you can add your own POIs. Its not RWG from the FPs but It has a tendency to be a lot better than the vanilla RWG.





 
Last edited by a moderator:
bobrpggamer said:
Could you add your airport in a random teragon map
Click to expand...
Riamus had mentioned that as well. It should be straight forward to add the airport to a Teragon map, since my prefabs are designed to be modular. Trying to get the airport to work with Random Gen has been challenging, to say the least.  So I could shift gears and focus on adding the airport to a Teragon map.

 
bobrpggamer said:
Riamus know a lot about teragon (he's helped me with it). Could you add your airport in a random teragon map. I think you can add your own POIs. Its not RWG from the FPs but It has a tendency to be a lot better than the vanilla RWG.
Click to expand...
Teragon is not quite ready to place multi-tile POI like this airport on a random map.  It is coming, but not there yet.

 
Riamus said:
Teragon is not quite ready to place multi-tile POI like this airport on a random map.  It is coming, but not there yet.
Click to expand...

To be honest, I do not know the first thing about custom POIs and the RWG. I guess maybe it could be added in a list of possible POIs, but I really do not have a clue. I do remember a post or two from the terragon post that discussed adding custom POIs, but I still really do not know or have a clue how to do that and I do not even know how the tiles are made and how to alter that. I just roll the dice and hope for the best outcome for a teragon map.

Now if the fun pimps had any sense they would allow custom POIs to be a part of the game. It saves them time from making their own. I think the compopack being a thing means the fun pimps really do not care about other peoples custom work. Valve was good that way, they added custom maps to CSS and DOD, but that's Valve.

I get irritated with the lack of paint choices myself, but would love to make my own and add them to the game, but that seems like something else they do not want.

At least there's mods, some games do not even allow that at all, and modlets have to be the easiest way to add a mod to the game. Unlike Bethesda, in that you have load the mods in a specific order, and one thing goes wrong and the game stops working.

 
Last edited by a moderator:
bobrpggamer said:
To be honest, I do not know the first thing about custom POIs and the RWG. I guess maybe it could be added in a list of possible POIs, but I really do not have a clue. I do remember a post or two from the terragon post that discussed adding custom POIs, but I still really do not know or have a clue how to do that and I do not even know how the tiles are made and how to alter that. I just roll the dice and hope for the best outcome for a teragon map.

Now if the fun pimps had any sense they would allow custom POIs to be a part of the game. It saves them time from making their own. I think the compopack being a thing means the fun pimps really do not care about other peoples custom work. Valve was good that way, they added custom maps to CSS and DOD, but that's Valve.

I get irritated with the lack of paint choices myself, but would love to make my own and add them to the game, but that seems like something else they do not want.

At least there's mods, some games do not even allow that at all, and modlets have to be the easiest way to add a mod to the game. Unlike Bethesda, in that you have load the mods in a specific order, and one thing goes wrong and the game stops working.
Click to expand...
Custom POIs can easily be added to the vanilla RWG maps.  Just place the mod or POI pack into your mods folder and make a map. Teragon needs a little more, but it is still easy once you understand what to do.

The issue with the airport is that it is not one POI.  It is many POI that have to be placed side by side in a specific order.  Random placement of POI, which is the normal way maps are made doesn't work in that regard because it isn't random.  Teragon will support grouping tiles into a specific way, though that is still in the works.  We hope that RWG will eventually allow such control as well, but no guarantees there.  Until then, the airport has to be placed manually.

I am not sure if paint choices can be added with a mod.  Everyone keeps asking for more and we keep being told there is limited space for different paints, though I really do think it is possible to increase that without significant changes. I'd personally make each paint they have a texture that then had a color applied to it similar to how they paint vehicles and color clothes, armor and weapons.  This way, instead of having a bunch of painted concrete options preventing space for other options, you have only one and can then color it from a list of colors.  But I don't know their code or how they set things up, so maybe it isn't an option at this point in development.  The biggest concern with this is that you are adding another byte of information to every side of every block on the map (minus terrain and certain blocks), so saves and maps would take up more space.

 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top