• If you have a mod, tool or prefab, please use the Resources section. Click Mods at the top of the forums.

A19e Nitrogen - UNSTABLE

Status
Not open for further replies.
As far as prefab file to use with Nitrogen. I have not heard of one. I think Dwall mentioned maybe doing one in his discord.

 
Hi dudes. Today I have started to play this map, I share preview (city mega size, and lots of cities, towns, farms...). I think it works fine and I'm really happy with the map, but I'm reading this thread and now I'm worried: Do you think it will keep working fine when I start to visit the cities? I want to know if the problem with throughtput is only when rendering that mega cities or it is always when playing on this kind of map. I have 16Gb de RAM, i7, 2Gb NVidia GPU

previewMap 3.jpg

 
So I was generating a 16K map (just for fun to see how Long it would take, no actual Intention of playing on it)  and then came across this in the very end (see Picture)
As you can see, the cmd window shows an error, but the Nitrogen window doesn't. 
to this Point I don't know if it already failed, or if nitro is still working on something in the Background. 

cheers.

spacer.png


nitro error.png

 
As far as I can see it is internal problem of the application. It is multiThreaded and one of the Threads actually becomes lack of heap, meaning there are too many objects in the heap and GC could not clean it up in time or they are yet pointed from some other place.

If you start the program from a jar with console command you can alter the amount of memory dedicated to the heap of java with following:  

java -Xmx6g myprogram

here 6g is 6Gb of RAM just note how many you need. myprogram stands for compiled java jar application.

BTW when you download nitrogen you have a 'start_8G_Ram_16kMaps.bat' which is already preconfigured with 8Gbs of RAM for nitrogen and is meant by devs for 16K maps.

 
Hi there, I'm sorry if this has been asked but I couldn't find a definitive answer by searching. Does this work with 18.4, I;ve recently updated from 18.3 and generated a new map last night and some buildings and blocks looked off, like they were covered in a  near translucent block you couldn't see through or destroy, but could walk through. I didn't have this issue with 18.3 so was just wondering. Thanks.

 
I tried to manually make a 1024x1024 map, but the tool always switch back to default size (4K)

Is there a way to make smaller maps ?
Thanks

 
It seems Nitrogen requiere a dedicated section at this forum, we are many people asking about this great editor xD

By now, I have played a 8192x8192 size map with a friend, tha last screenshot I shared here, with ultra size cities, lots of citites, countrys, rednecks, POIs, etc.

The result: An "old generation" i7 16Gb RAM 2Gb NVidia get out of RAM many times, with about 1 hour playing. However a "young generation" i7 16Gb RAM 2GB Nvidia works well with graphics at medium, so I think this is the minimun requirement for such a map.

I really love this game 😛

 
Hello,

Every time I generate a world, the pictures attached happens, every single time.  Happens with custom settings, default settings, 4k/6k/8k maps.  Tested map generation on my laptop then copied to my PC to run, same deal.

You will note I am using the CompoPack add on, also happens with vanilla poi's and settings, so its not that.

Literally cannot make a map without this odd event of non rendered world happening.

Oddly enough, snow biome appears to render and work fine, you still get the square ish hole overlap though.

It appears that ive noticed a few others have this issue but unresolved.

So many people have this nitrogen maker working so must be something more on my pc with the generation but I am at a loss as to what it is.

If anyone has any ideas I would be very grateful.

Many thanks.

20200504173943_1.jpg

20200504173952_1.jpg

20200504174013_1.jpg

20200504174109_1.jpg

 
Last edited by a moderator:
Panachronic said:
Hello,

Every time I generate a world, the pictures attached happens, every single time.  Happens with custom settings, default settings, 4k/6k/8k maps.  Tested map generation on my laptop then copied to my PC to run, same deal.

You will note I am using the CompoPack add on, also happens with vanilla poi's and settings, so its not that.

Literally cannot make a map without this odd event of non rendered world happening.

Oddly enough, snow biome appears to render and work fine, you still get the square ish hole overlap though.

It appears that ive noticed a few others have this issue but unresolved.

So many people have this nitrogen maker working so must be something more on my pc with the generation but I am at a loss as to what it is.

If anyone has any ideas I would be very grateful.

Many thanks.

View attachment 8809

View attachment 8810

View attachment 8811

View attachment 8812
Click to expand...
Hi looks like your occlusion video settings might need changing ..and the 2 top grey/beige/brown pics look like the biomes.png needs to be put through the fixer in tools/nitrogen folder..

 
Last edited by a moderator:
When i try to play a nitrogen created map I always get an error when the quest triggers to locate the nearest trader (right after placing a campfire). Just gives a nullexception error and displays the trader at 0.0km. I do not get this error when using a RWG created map even a map from the v17 RWG, though that has wonkiness of its own.

I am using 18.4 but the nitrogen download is 18.2..not sure if this is causing a problem with the quest? The only manual change I have made is to set skillpoints per level to 2 in the xml, but it doesnt cause an issue with base maps.

Is there a way to manually set the trader for this quest or any other workaround?

EDIT: It seems like it was tied to selecting the compo pack in  Nitrogen, when i switched to vanilla the prefabs started showing up

 
Last edited by a moderator:
Hi there,

Just started using Nitrogen - it's great!

However, I am getting a few warnings in the console about some POIs not found. I used the switch Compo42 in the Nitrogen generator but installed CompoPack_43 (by the way, I generated the world without CompoPack installed, then installed CP).

Any ideas?

 
I use to get those errors also and am not sure how I fixed it. I think I may have added the compopack43 to Nitrogen and my game but still used vanilla in prefab list when I generated the game in Nitrogen

 
Last edited by a moderator:
Is anyone getting error when trying to download the comppack 43 for alpha 18.4?

Is anyone getting error when trying to download the comppack 43 for alpha 18.4?

 
Last edited by a moderator:
Status
Not open for further replies.
Back
Top