• If you have a mod, tool or prefab, please use the Resources section. Click Mods at the top of the forums.

A19e Nitrogen - UNSTABLE

Status
Not open for further replies.
@Damocles

Is there a way to tone back the number of the Factories that spawn.   In the last gen I did with Nitrogen, there were so many Shotgun Messiah and Shamway Factories.  In a few cases there were 2 Shotgun factories within blocks of each other.

Thanks for your time and insight.

 
i have the 64bit java installed. How much ram can it have a max? i tired giving it 10gb but it wouldn't even use 8 hardly while i was gen a 16k map. which ended up taking alittle over 28mins 

 
LewZephyr said:
@Damocles

Is there a way to tone back the number of the Factories that spawn.   In the last gen I did with Nitrogen, there were so many Shotgun Messiah and Shamway Factories.  In a few cases there were 2 Shotgun factories within blocks of each other.

Thanks for your time and insight.
Click to expand...
Not directly. What you can do is edit the resources/prefablist.txt and add the zone "industrial" to a bunch of houses for example.

This will increase the number of houses placed in the industrial "locations", and thus have less of the factories and other industrial/commercial type buildings.

Each city will spawn a certain number of POIs for each zone. So assigning POIs to that zone will change the mix.

You could also add the zonetype "unique" to the factories, which will make them only spawn once per map.

 
Hello,

I've just installed this for A19 and everything works fine except when the find trader starter quest begins it says "No Trader" and provides no way point.

Is there a way to fix this? I've tried creating two different maps but both end up with the same issue.

 
caatalyst said:
Hello,

I've just installed this for A19 and everything works fine except when the find trader starter quest begins it says "No Trader" and provides no way point.

Is there a way to fix this? I've tried creating two different maps but both end up with the same issue.
Click to expand...


Hi caatalyst

It is a vanilla bug, it has nothing to do with nitrogen.

It is fixed upon finding another trader, at least that's how it happened to me.

 
Last edited by a moderator:
kaneta1 said:
house_modern_15 is added in b167.

prefablist.txt code is

house_modern_15,USED,2,-4,31,18,46,houses
 
Click to expand...
Спс за инфу внес изменение сам перед загрузкой карты

 
Last edited by a moderator:
Hey, Damacoles....good to see you still working in this and adding features.

I tried the highways and they look great, but (at least from the one I saw) they were a lot higher than expected, making a easy cheese horde night base.

Maybe they could be lowered 5-10 blocks to meet the land elevation better?

A question: vanilla seems to pad space between pois so they aren't as bunched up and back to back as Nitrogen maps are.

Would padding poi sides and backs be possible with biome blocks or blank poi sized spaces, so the actual pois are a little more spaced apart?

Setting road width helps, but it looks like vanilla either adds blank biome poi sized spaces between some pois, or adds either back or side padding to keep them from always being right next to each other.

Btw, AMAZED at the generation times! 30 seconds for a 4k, an 1.5 minutes here for a 8k!

Keep up the great work!

 
I am not sure on what is customary about a new member posting favors or even questions.  I am a single Father of a 14yo girl and she loves this game (among others).  On PS4 it sucks so we started running our own dedicated server.  I found your tool Damocles, and I LOVE it!

  I have a question; and I am no stranger to learning new code.  I have wrote many in depth scripts and plugins for Ultima Online and Everquest.  Like 15,000 lines of code.  XML is new to me, especially with coordinates.  I might as well get in to my question.

You have the Resident Evil Mansion Prefab! We LOVE that game and are still looking for it (5 or 6 spawned on our 16k map).

While looking through mods, we found Racoon City Police Department.  Is there any way to add that in manually to the files so it can be added during a world creation?

Sorry, Im new to this kinda stuff, but I figure going in to the setting files and such there must be a way, if even swapping out it for something else similar in size.  Is it possible for me to add it? (If so, how in a short explaination?) If not, would you be interested in adding it in?

Its called "Chaotic RPD" in the mods section if that helps.  :)

Thank you for your time in reading my question.

Sincerely, Coragin

 
I trying out Nitrogen for the first time for my server, I am tired of seeing awesome Nitro maps everywhere  but my server :)

So a couple of questions:

1. I normally use 8192 for my maps (8K)  if I go to 10K will A19 be ok with that?  seems like an odd size

2. anyone test CPM commands with Nitrogen?  specifically "cpm-getprefab reset"

other than that - I am excited to test tonight

 
I created a whole 8k map, but the cities won't load. I drive to the city and the buildings disappear. Just when I resetchunk Sr, they come back, but I can't do this every chunk and every time I play the game. 

Any ideas? 

 
Lonestarcanuck said:
I trying out Nitrogen for the first time for my server, I am tired of seeing awesome Nitro maps everywhere  but my server :)

So a couple of questions:

1. I normally use 8192 for my maps (8K)  if I go to 10K will A19 be ok with that?  seems like an odd size

2. anyone test CPM commands with Nitrogen?  specifically "cpm-getprefab reset"

other than that - I am excited to test tonight
Click to expand...
I have been making the max 16384 x 16384 and have worked out quite well.  Its really nice.  Made a few 12k 10k and 14k as well.

Hope this helps.

 
So TFP released a new build B173 for A19e.  do I need a new version of Nitro and new map?
B173 has changes for sleepers.

PS: is there a Nitro discord?  

 
Ahoy!

So I've generated quite a few maps, with no issues at all,  love the map creation, and I am 100% convinced there isn't a better way to do this.

I am asking today to find out if I did something wrong recently,  I've brought in one of my 16k maps to both the last Alpha build, and the new one that was released today, and the top 5 or 6 layers of dirt are coming up with 10k health.   yeah, 10k.  Had one of my players tell me about it today while I was at work, and just finally got around to asking about it this evening.

I did some good old google searching, and most of the information for the game hasn't been update since A15(ish) on configs and A18 stuff.

I run a dedicated server running windows server and 128g of ram.

I installed the "extras" per instructions on the site and I have no issues with the prefabs showing up on the map for anyone, so I am almost positive I did that right.  I don't see any settings to adjust hardness of certain blocks, but I am a total noob to the back end of 7d2d so far.

Please let me know if there is something I can do, check, troubleshoot, etc.  If this is a me issue or something I can do to set up the game differently, I'm all ears.  I DO know the RWG in the game worked properly (aside from the fact the map sucked) and the default Navezwhatever it's called is set up properly and works fine.  It only seems to be a problem with these generated maps.  (Which leads me to believe I must have done something wrong somewhere)

Sincerely,

Me

 
A new building was added in b173.
To want to add the building right now 
prefablist.txt Please add below.

house_modern_16,USED,2,-5,35,16,55,houses

 
Gosh, this tool is super fun to play with. Thanks for making it!

That being said, is there a forum topic around her where people can share their best/favorite Nitrogen maps for A19? I've been looking all over for one. ( if this is the wrong place to ask, please let me know ) 

 
Status
Not open for further replies.
Back
Top