Pwnocchio
New member
Wooden frames, when placed adjacent to or in support of concrete seem to be eroding the concretes strength value. Hit points are not impacted.
We were having unexplained collapses from the ceiling in our base, built in the wilderness (so no undermining). We even went so far as to drill the support pillars all the way directly to bedrock, but a few ceiling plates just would not stay. You could place a concrete plate in the spot, but if you walked over it it would fall. When placing those pieces there would be no yellow or pink warning either.
At one point I placed wooden frames adjacent to a support column, did nothing else to alter the design, then removed the wooden frames... and new tiles fell from the ceiling.
I found that by replacing the concrete support structure anywhere that had been touched by wooden frames during construction I was able fix the problem.
NOTE: This is a non-modded A20 server, latest stable.
We were having unexplained collapses from the ceiling in our base, built in the wilderness (so no undermining). We even went so far as to drill the support pillars all the way directly to bedrock, but a few ceiling plates just would not stay. You could place a concrete plate in the spot, but if you walked over it it would fall. When placing those pieces there would be no yellow or pink warning either.
At one point I placed wooden frames adjacent to a support column, did nothing else to alter the design, then removed the wooden frames... and new tiles fell from the ceiling.
I found that by replacing the concrete support structure anywhere that had been touched by wooden frames during construction I was able fix the problem.
NOTE: This is a non-modded A20 server, latest stable.
Last edited by a moderator:
