I've noticed that the new water physics dont work with a lot of existing prefabs. Fountains pour water out their sides, and waterfalls empty out until the water at the top looks like it floats in place after the rest empties out.
We need the current water blocks because they work pretty well, but we also need a "static water block". Full block, half block, maybe a block that fills the existing area and then goes static. This would allow waterfalls and stuff to "appear" flowing, even though the water isnt actually moving, and would stop water from going to the lowest point until it overflows. I've tried everything with existing blocks to try and trick the game, using glass plates and blocks to hold water, however water mass seems to remain constant if there is more water above. Static water blocks wouldnt look at this and just stay in place.
We need the current water blocks because they work pretty well, but we also need a "static water block". Full block, half block, maybe a block that fills the existing area and then goes static. This would allow waterfalls and stuff to "appear" flowing, even though the water isnt actually moving, and would stop water from going to the lowest point until it overflows. I've tried everything with existing blocks to try and trick the game, using glass plates and blocks to hold water, however water mass seems to remain constant if there is more water above. Static water blocks wouldnt look at this and just stay in place.