sandman2838
New member
I am pretty sure I've seen this before but couldn't find it. Anyway, xbox 1, scavenger, default except no running, in the small town sw of hub city. I had marked off and cleared the area for my build, then dug down one block deep over the entire area (41x41) While placing the adobe blocks for the floor, I noticed every now and then a placed block that wasn't attached to another block it would just simply explode, no hint something was up. I could try several times and it would do the same thing, then, by placing a block in the adjacent square first, the block in question could then be placed.
As to your questions, I leveled the ground with frames before digging and dug everything by hand. The blocks have behaved normally since without problems. I have a video and will upload tonight.
As to your questions, I leveled the ground with frames before digging and dug everything by hand. The blocks have behaved normally since without problems. I have a video and will upload tonight.