Alpha 18 blocks breaking

Status
Not open for further replies.
K

KINGY5891

Refugee
hi there, currently running a pingperfect server using a nitrogen generated map. server running on alpha 18.1 b6 game on 18,1 b8.

we have alot of problems on our bases with blocks breaking when augering somewhere else nearby. then when fixing the block / blocks that have fell out you cannot replace them, they just break straight away. we do have underground bases at the bottom of the map, and have like a base on top. but the buildings are all constructed well (alot of supports). does anyone have a fix for this?

thanks

 
If you have underground dug up DIRECTLY under your base then this can happen

You could put lots of support blocks (even simple wood blocks) down there directly under your base to repair this. For a column to be a supporting column it simply needs an UNBROKEN vertical strings of blocks from bedrock up to it.

 
I've seen this occur if there is a large amount of bedrock exposed in the area. It will even happen at bedrock when placing blocks.

So you've got a double whammy. Air space under the base, and bedrock exposed to air.

 
Dunno it if works or not, but we've always dug to 1 layer before bedrock to keep from exposing it.
Click to expand...
Nah, Your supports need to go from bedrock all the way up if you have any gaps under your base things can go bad. If you want something at bedrock under your base it is best build support columns all the way up so you dont accidentally put a gap and ruin your SI up top. Either that or just dont dig under your base, do that nearby. Separate it from your base

 
Nah, Your supports need to go from bedrock all the way up if you have any gaps under your base things can go bad. If you want something at bedrock under your base it is best build support columns all the way up so you dont accidentally put a gap and ruin your SI up top. Either that or just dont dig under your base, do that nearby. Separate it from your base
Click to expand...

This.

If you undermine any block so it is vertically not connected ALL THE WAY to bedrock it is considered structurally unsound, and any block attached to it will not get the full horizontal support statistic of the undermined block's face. Even if you reinforce it on the sides it will not matter.

Never dig under your base even with a tunnel unless you know what you're doing. If you find the bits that are falling off you can place a block in the undermined bit - any block - and it will once again become structurally sound.

 
Nah, Your supports need to go from bedrock all the way up
Click to expand...
While this is true, I'm referring to the "exposed bedrock" causes instability, not the "lack of vertical blocks"

causes instability.

Some public servers, for many alpha's, have had a rule that players are not allowed to expose bedrock.

 
Status
Not open for further replies.
Back
Top